Yes — the McLean Dynamic Retention Sling (DRS) fits the Killer Instinct Crossbows. The front of the sling carries its own hook, so up front it only needs a loop to clip onto — never a second hook.
Front attachment
Sling swivel stud or mount ahead of the trigger group — varies by configuration.
Killer Instinct sells single-point slings for its bows, which attach differently to a two-point — confirm what your bow carries ahead of the trigger group before choosing.
Rear attachment
Sling swivel stud in the stock — varies by configuration.
Check the underside of the stock for a threaded stud.
Why this sling on a Killer Instinct Crossbows
A crossbow is awkward to carry by hand and worse to climb with. A sling that cinches tight for a stand climb and releases into a ready position solves the two moments that actually matter.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the crossbow against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the crossbow. Tube unloaded, action open, chamber checked visually and physically.
- Front: clip the sling hook to the sling swivel stud or mount ahead of the trigger group.
- Rear: attach at the sling swivel stud in the stock.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit a Killer Instinct Crossbows?
Yes. At the front the sling uses its own hook, so it needs a loop to clip to: the sling swivel stud or mount ahead of the trigger group (added separately). At the rear it attaches at the sling swivel stud in the stock (added separately).
Do I need a snap hook for the front of my Killer Instinct Crossbows?
No. The McLean sling carries its own hook at the front as part of the retention system. It only needs something to hook onto — a factory loop, a swivel, or any loop you add. Buying a second snap hook for the front is wasted money.
What do I need to buy for a Killer Instinct Crossbows?
At the front you need a loop: Killer Instinct sells single-point slings for its bows, which attach differently to a two-point — confirm what your bow carries ahead of the trigger group before choosing. At the rear: Check the underside of the stock for a threaded stud.
What length sling do I need for a Killer Instinct Crossbows?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
