Sling attachment guidance for the Wicked Ridge Crossbows. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.

Front attachment
Sling swivel stud or mount ahead of the trigger group — not confirmed for every configuration.
Wicked Ridge is TenPoint's value line and shares the sling accessories, which use swivels and need a stud. Check ahead of the trigger group before buying hardware.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Rear attachment
Sling swivel stud in the stock — not confirmed for every configuration.
Check the underside of the stock for a threaded stud.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Why this sling on the Wicked Ridge Crossbows
A crossbow is awkward to carry by hand and worse to climb with. A sling that cinches tight for a stand climb and releases into a ready position solves the two moments that actually matter.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the crossbow against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the crossbow. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the Wicked Ridge Crossbows?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my Wicked Ridge Crossbows?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the Wicked Ridge Crossbows?
Front: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware. Rear: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
What length sling do I need for the Wicked Ridge Crossbows?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Firearm photos: Ravin Crossbows — Ravin Crossbows, Used with manufacturer permission (Background removed; image resized and centered.); TenPoint Crossbows — TenPoint Crossbow Technologies, Used with manufacturer permission (Background removed; image resized and centered.); Barnett Crossbows — Barnett Outdoors, Used with manufacturer permission (Background removed; image resized and centered.); Excalibur Crossbows — Excalibur Crossbow, Used with manufacturer permission (Background removed; image resized and centered.); Killer Instinct Crossbows — Killer Instinct Crossbows, Used with manufacturer permission (Background removed; image resized and centered.); CenterPoint Crossbows — CenterPoint Archery, Used with manufacturer permission (Background removed; image resized and centered.).





