Yes — the McLean Dynamic Retention Sling (DRS) fits the Ravin Crossbows. The front of the sling carries its own hook, so up front it only needs a loop to clip onto — never a second hook.
Front attachment
Sling swivel stud or mount ahead of the trigger group — varies by configuration.
Ravin sells its own Shoulder Sling (R260) as an accessory, which tells you a sling is expected — but Ravin does not publish where it attaches. Look for a threaded stud ahead of the trigger group; if there is none, a rail or riser clamp makes one.
Rear attachment
Sling swivel stud in the stock — varies by configuration.
Check the underside of the stock for a threaded stud. Ravin's compact frames vary between models, so confirm on the bow rather than by model name.
Why this sling on a Ravin Crossbows
A crossbow is awkward to carry by hand and worse to climb with. A sling that cinches tight for a stand climb and releases into a ready position solves the two moments that actually matter.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the crossbow against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the crossbow. Tube unloaded, action open, chamber checked visually and physically.
- Front: clip the sling hook to the sling swivel stud or mount ahead of the trigger group.
- Rear: attach at the sling swivel stud in the stock.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit a Ravin Crossbows?
Yes. At the front the sling uses its own hook, so it needs a loop to clip to: the sling swivel stud or mount ahead of the trigger group (added separately). At the rear it attaches at the sling swivel stud in the stock (added separately).
Do I need a snap hook for the front of my Ravin Crossbows?
No. The McLean sling carries its own hook at the front as part of the retention system. It only needs something to hook onto — a factory loop, a swivel, or any loop you add. Buying a second snap hook for the front is wasted money.
What do I need to buy for a Ravin Crossbows?
At the front you need a loop: Ravin sells its own Shoulder Sling (R260) as an accessory, which tells you a sling is expected — but Ravin does not publish where it attaches. Look for a threaded stud ahead of the trigger group; if there is none, a rail or riser clamp makes one. At the rear: Check the underside of the stock for a threaded stud. Ravin's compact frames vary between models, so confirm on the bow rather than by model name.
What length sling do I need for a Ravin Crossbows?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
