Sling attachment guidance for the Beretta A300 Outlander. Check your exact configuration and both connectors before choosing the McLean Shotgun Sling. Factory attachment points do not by themselves confirm a direct fit.
Front attachment
Front attachment not confirmed — not confirmed for every configuration.
Beretta's semiauto manual drawing for the A300 Outlander labels the fore-end cap but no sling mount at the front. The Outlander product page does not mention sling hardware. Check the fore-end cap on your gun for a stud or eyelet.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Rear attachment
Sling mount under the buttstock — factory attachment point.
The A300 Outlander drawing in Beretta's semiauto manual labels item 11, sling mount, on the underside of the buttstock. Beretta does not say whether it is a stud or a fixed swivel. Look at the fitting before buying a swivel.
Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
Add it to your cart
Pick a colour and add the sling. You can review everything in your cart.
Why this sling on the Beretta A300 Outlander
A hunting shotgun spends most of the day carried, not shouldered — across fields, in and out of a blind, over a boat gunwale. The sling needs to sit still while walking and come off fast when a bird flushes.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the shotgun against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the shotgun. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
The cited manual covers several Beretta semiautos and has a drawing specific to the A300 Outlander, shown with a wooden stock. Beretta lists Outlander versions in walnut, synthetic, camo and silver. The synthetic and camo stocks were not checked separately.
Only the rear point is documented. Plan the front attachment separately, and confirm the type of the rear fitting before selecting connectors. The A300 Ultima Patrol is a different gun with its own QD points.
Questions
Does the McLean Shotgun Sling fit the Beretta A300 Outlander?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my Beretta A300 Outlander?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the Beretta A300 Outlander?
Front: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware. Rear: Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
What length sling do I need for the Beretta A300 Outlander?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Beretta 1301 Tactical
Beretta A300 Ultima Patrol
Beretta A400 (Xplor/Xtreme)
Beretta CX4 Storm
Mossberg 500 (hunting/field)
Benelli Super Black Eagle (SBE 3)
Benelli Montefeltro
Browning A5
Firearm photos: Beretta 1301 Tactical — Self, CC BY-SA 4.0 (Background removed; image resized and centered.); Beretta A300 Ultima Patrol — Beretta, Used with manufacturer permission (Background removed; image resized and centered.); Beretta A400 (Xplor/Xtreme) — Picanox (Waltherppx), CC BY-SA 4.0 (Background removed; image resized and centered.); Beretta CX4 Storm — Rama, CC BY-SA 2.0 FR (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Mossberg 500 (hunting/field) — Chuto at English Wikipedia, CC BY-SA 3.0 (Background removed; image resized and centered.); Benelli Super Black Eagle (SBE 3) — Benelli USA, Used with manufacturer permission (Background removed; image resized and centered.); Benelli Montefeltro — Benelli, Used with manufacturer permission (Background removed; image resized and centered.); Browning A5 — Browning, Used with manufacturer permission (Background removed; image resized and centered.).
