Yes — the McLean Shotgun Sling fits the Winchester SX4. The front of the sling carries its own hook, so up front it only needs a loop to clip onto — never a second hook.
Front attachment
Sling swivel stud — already on the gun.
Sling swivel studs are listed as standard equipment across the SX4 line, including Compact, Hybrid, Universal Hunter and Waterfowl Hunter models.
You need a sling swivel in the stud. The stud itself is just a threaded post — a swivel screws into it and gives the sling’s hook the loop it clips to. Any standard sling swivel fits.
Rear attachment
Sling swivel stud — already on the gun.
Part of the same standard stud fitment. Swivels are not supplied.
You need a sling swivel in the stud. The stud is a threaded post, not a loop — a standard sling swivel screws into it and gives the sling something to attach to.
Why this sling on a Winchester SX4
A hunting shotgun spends most of the day carried, not shouldered — across fields, in and out of a blind, over a boat gunwale. The sling needs to sit still while walking and come off fast when a bird flushes.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the shotgun against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the shotgun. Tube unloaded, action open, chamber checked visually and physically.
- Front: clip the sling hook to the sling swivel stud.
- Rear: attach at the sling swivel stud.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Questions
Does the McLean Shotgun Sling fit a Winchester SX4?
Yes. At the front the sling uses its own hook, so it needs a loop to clip to: the sling swivel stud (already fitted). At the rear it attaches at the sling swivel stud (already fitted).
Do I need a snap hook for the front of my Winchester SX4?
No. The McLean sling carries its own hook at the front as part of the retention system. It only needs something to hook onto — a factory loop, a swivel, or any loop you add. Buying a second snap hook for the front is wasted money.
What do I need to buy for a Winchester SX4?
Nothing at the front — the sling swivel stud is already on the gun. At the rear the sling swivel stud is already there too.
What length sling do I need for a Winchester SX4?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Other firearms we have fitment for
Firearm photos: Mossberg 500 (hunting/field) — Chuto at English Wikipedia, CC BY-SA 3.0; Benelli Super Black Eagle (SBE 3) — Benelli USA, Used with manufacturer permission.
