Sling for the IWI Tavor TS12 — Fitment & Mounts

Sling attachment guidance for the IWI Tavor TS12. Check your exact configuration and both connectors before choosing the McLean Shotgun Sling. Factory attachment points do not by themselves confirm a direct fit.

IWI Tavor TS12
IWI Tavor TS12 — representative configuration; fittings vary by model. Photo: IWI US, Manufacturer image used with permission. Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.
Explore the McLean sling Shotgun Sling for Hunting, Home Defense & Tactical Use

Rated 4.9 out of 5 from 169 reviews In stock Price range: $84.99 through $87.99

Shop the sling →

Front attachment

Factory QD sling socket — factory attachment point.

IWI lists four sling attachment points as standard on the TS12, and the gun ships with two quick-detachable sling swivels in the box. Published specs do not state which of the four sit forward.

Factory attachment point: a QD cup needs a matching swivel; a socket provision may also need a separate cup. Confirm what is installed and what the hardware includes.

Rear attachment

Factory QD sling socket — factory attachment point.

Part of the same set of four factory sling attachment points. IWI sells 1 1/4in QD ball-bearing swivels for the TS12 if you need more than the pair supplied.

Factory attachment point: a QD cup needs a matching swivel; a socket provision may also need a separate cup. Confirm what is installed and what the hardware includes.

Why this sling on the IWI Tavor TS12

Duty, home-defence and competition use put a shotgun on and off the shoulder constantly, often with a hand busy loading. Retention matters more here than raw comfort: the gun has to lock against the body and release without a second thought.

The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the shotgun against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.

Fitting it

  1. Clear the shotgun. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
  2. Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
  3. Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
  4. Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
  5. Check the transition. It should shoulder without pulling tight across your chest.

Questions

Does the McLean Shotgun Sling fit the IWI Tavor TS12?

Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.

Do I need a snap hook for the front of my IWI Tavor TS12?

The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.

What do I need to buy for the IWI Tavor TS12?

Front: Factory attachment point: a QD cup needs a matching swivel; a socket provision may also need a separate cup. Confirm what is installed and what the hardware includes. Rear: Factory attachment point: a QD cup needs a matching swivel; a socket provision may also need a separate cup. Confirm what is installed and what the hardware includes.

What length sling do I need for the IWI Tavor TS12?

There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.

Manufacturer and attachment references

Other firearms we have fitment for

Firearm photos: IWI Tavor X95 — IWI US, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Mossberg 590 Shockwave — O.F. Mossberg & Sons, Used with manufacturer permission (Background removed; image resized and centered.); Benelli M4 — United States Marine Corps, Public domain (Background removed; image resized and centered.); Beretta 1301 Tactical — Self, CC BY-SA 4.0 (Background removed; image resized and centered.); Beretta A300 Ultima Patrol — Beretta, Used with manufacturer permission (Background removed; image resized and centered.); Mossberg 500 Tactical — Егоров Игорь (SONY), CC BY-SA 2.5 (Background removed; image resized and centered.); Mossberg 590 — U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives, Public domain (Background removed; image resized and centered.); Mossberg 590A1 — Jawatech at English Wikipedia, Public domain (Background removed; image resized and centered.).

Your Cart 0

Your cart is empty

Continue Shopping