Sling attachment guidance for the CZ BREN 2 Ms Carbine. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.
Front attachment
M-LOK forend slot — aftermarket attachment option.
CZ lists an M-LOK forend on the BREN 2 Ms Carbine. An M-LOK slot needs a sling mount added before a sling can attach. The BREN 2 manual also lists a front swivel, but it is drawn on the short military rifle, and CZ does not show that it is fitted to the long carbine forend.
Aftermarket attachment option: a webbing slot is not a QD cup or proof that a hook fits. Confirm the connector and webbing dimensions for this opening.
Rear attachment
Rear swivel at the rear of the receiver — factory attachment point.
The BREN 2 manual linked from the Ms Carbine page lists a rear swivel among the rifle's parts, drawn as a plate fixed at the rear of the receiver. The manual does not state whether its openings are webbing loops or push-button QD sockets, so check the part before choosing a connector.
Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
Add it to your cart
Pick a colour and add the sling. You can review everything in your cart.
Why this sling on the CZ BREN 2 Ms Carbine
Carry, transition and retention are the three things a sling has to get right. The McLean design covers all three from one setting rather than trading one off against another.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the rifle against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the rifle. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
The manual CZ links is the general BREN 2 instruction manual, written around the select-fire service rifle. The Ms Carbine, the Ms pistols in 5.56 and 7.62x39 and other barrel lengths use different forends, so check the front of your firearm rather than relying on the military parts list.
A plate with webbing slots, a push-button QD socket and an M-LOK slot each need different hardware. Record what is at each end of the carbine and what comes with the sling before ordering.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the CZ BREN 2 Ms Carbine?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my CZ BREN 2 Ms Carbine?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the CZ BREN 2 Ms Carbine?
Front: Aftermarket attachment option: a webbing slot is not a QD cup or proof that a hook fits. Confirm the connector and webbing dimensions for this opening. Rear: Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
What length sling do I need for the CZ BREN 2 Ms Carbine?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
CZ 457
CZ Scorpion
CZ BREN 2 Ms Carbine
Ruger Mini-14
SKS
SIG Sauer MCX
CVA Muzzleloaders (Wolf / Optima / Accura)
Browning BAR
Firearm photos: CZ 457 — Fanchigo, CC0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); CZ Scorpion — Costas-1963, CC0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); CZ BREN 2 Ms Carbine — CZ (Ceska zbrojovka), Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Ruger Mini-14 — Jan Hrdonka, CC BY-SA 3.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); SKS — Armémuseum (The Swedish Army Museum), CC BY-SA 4.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); SIG Sauer MCX — Mike Searson, CC BY-SA 4.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); CVA Muzzleloaders (Wolf / Optima / Accura) — CVA (BPI Outdoors), Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Browning BAR — Browning, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).
