Sling attachment guidance for the CVA Muzzleloaders (Wolf / Optima / Accura). Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.
Front attachment
Forend sling mount, documented on the Optima V2 — factory attachment point.
CVA's Optima and Wolf owner's manual labels a sling mount under the forend of the Optima V2 rifle. CVA's diagram does not say whether it is a threaded stud or another fitting. The Wolf V2 and the Accura are not labelled in CVA's manuals, so inspect those models directly.
Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
Rear attachment
Buttstock sling mount, documented on the Optima V2 — factory attachment point.
The same diagram labels a second sling mount under the buttstock of the Optima V2. CVA does not describe the fitting further. On a Wolf, an Accura or the redesigned Optima, confirm what is installed under the stock before choosing a swivel.
Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
Why this sling on the CVA Muzzleloaders (Wolf / Optima / Accura)
Carry, transition and retention are the three things a sling has to get right. The McLean design covers all three from one setting rather than trading one off against another.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the rifle against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the rifle. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
This is a brand page covering three CVA break-action families. Only the Optima V2 rifle has its sling mounts named in a CVA document. CVA's Accura MR-X and LR-X manual labels the rifle's features without naming a sling fitting, and the current Wolf, Optima and Accura product pages do not list one.
The Optima V2 pistol diagram in the same manual shows no sling mount. If your rifle has a protruding post under the stock and forend, it needs a matching stud-type swivel, not a push-button QD swivel. Check the ramrod and its thimbles for clearance at the front.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the CVA Muzzleloaders (Wolf / Optima / Accura)?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my CVA Muzzleloaders (Wolf / Optima / Accura)?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the CVA Muzzleloaders (Wolf / Optima / Accura)?
Front: Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance. Rear: Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
What length sling do I need for the CVA Muzzleloaders (Wolf / Optima / Accura)?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Firearm photos: CVA Muzzleloaders (Wolf / Optima / Accura) — CVA (BPI Outdoors), Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Ruger Mini-14 — Jan Hrdonka, CC BY-SA 3.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); SKS — Armémuseum (The Swedish Army Museum), CC BY-SA 4.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); SIG Sauer MCX — Mike Searson, CC BY-SA 4.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Browning BAR — Browning, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Gamo Air Rifles — Gamo Outdoor, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).
