Sling attachment guidance for the Savage 110. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.
Front attachment
Swivel studs on the 110 Carbon Tactical stock — factory attachment point.
Savage lists three sling-swivel studs on the 110 Carbon Tactical's AccuFit/AccuStock configuration. Check the fore-end fittings on that model. The 110 Precision and 110 Elite Precision use documented MDT chassis with M-LOK accessory provisions, so their front hardware requires a separate selection.
Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
Rear attachment
Rear stock attachment by 110 variant — not confirmed for every configuration.
Identify the rear fitting on the exact stock before ordering: the 110 family name and an M-LOK fore-end do not determine the rear connector. Carbon Tactical stock evidence does not establish the rear interface of a Precision chassis or a replacement stock.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Why this sling on the Savage 110
A hunting or precision rifle is carried for hours and shot once. What matters is that it rides still on the walk in, comes off cleanly, and never has a loose loop to snag when you go prone or into a rest.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the rifle against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the rifle. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
The pictured rifle is a 110 Carbon Tactical. Savage documents three studs on this configuration. Inspect which are free when a bipod is fitted, and match the swivel to the available stud; do not assume the accessory and sling can share an occupied attachment.
Savage's chassis guide identifies the 110 Precision with MDT LSS XL and the 110 Elite Precision with MDT ACC. Both have M-LOK provisions for sling accessories. An empty M-LOK slot is not itself a sling loop or QD socket; identify the compatible attachment and what it includes before adding a swivel.
For a stud-equipped 110, the buying list is the sling plus compatible stud-mounted swivels wherever they are missing. For a chassis rifle, list the front mount and rear attachment separately. The McLean front hook is already included; verify both connector fits before completing the kit.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the Savage 110?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my Savage 110?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the Savage 110?
Front: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud. Rear: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
What length sling do I need for the Savage 110?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Savage Axis
Savage Mark II
Ruger American
Tikka T3x
Remington 700
Browning X-Bolt
Winchester Model 70
Ruger Gunsite Scout
Firearm photos: Savage Axis — Savage Arms, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Savage Mark II — Savage Arms, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Ruger American — Sturm, Ruger & Co. Firearms, CC BY-SA 3.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Tikka T3x — Sako / Tikka, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Remington 700 — User:M855GT, CC BY-SA 3.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Browning X-Bolt — Browning, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Winchester Model 70 — Winchester Repeating Arms, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Ruger Gunsite Scout — Sturm, Ruger & Co., Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).
