Sling attachment guidance for the Henry Homesteader. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.
Front attachment
Front sling swivel stud — factory attachment point.
Henry's specification for the H27 Homesteader Carbine 9mm lists swivel studs among its extras. Henry's text does not say where the front stud sits; Henry's photo shows it under the forearm. A stud needs a stud-mount swivel. It is not a push-button QD cup.
Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
Rear attachment
Buttstock sling swivel stud — factory attachment point.
The same Henry specification covers the rear stud, which Henry's photo shows under the walnut buttstock. Confirm it on the actual carbine before fitting a swivel.
Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
Add it to your cart
Pick a colour and add the sling. You can review everything in your cart.
Why this sling on the Henry Homesteader
A PCC is short and light, which makes it easy to carry badly — slung loose it swings into everything. Competition and home-defence use both want it locked flat to the body between stages, then instantly free.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the carbine against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the carbine. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
This guide covers the H27 Homesteader Carbine in its standard and magazine-well adapter versions, which Henry lists with the same swivel studs. The Homesteader M-LOK Brushed Bronze adds two M-LOK slots at the front of the forearm and is listed with sling swivel studs as well.
On the M-LOK version the slots are an extra option, not a replacement for the stud. An M-LOK slot needs a sling mount added before it can take a sling. Check which version you own before choosing connectors.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the Henry Homesteader?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my Henry Homesteader?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the Henry Homesteader?
Front: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud. Rear: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
What length sling do I need for the Henry Homesteader?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Henry Model X
Henry H001
Ruger PC Carbine
CZ Scorpion
HK SP5
SIG Sauer MPX
Ruger LC Carbine
Firearm photos: Henry Model X — Henry Repeating Arms, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Henry H001 — Henry Repeating Arms, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Ruger PC Carbine — Picanox, CC BY-SA 4.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); CZ Scorpion — Costas-1963, CC0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); HK SP5 — Heckler & Koch, Manufacturer product image (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); SIG Sauer MPX — gar2chan, CC BY 2.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Ruger LC Carbine — Sturm, Ruger & Co., Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); KelTec SUB2000 — KelTec, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).
