Sling attachment guidance for the FN FAL. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.
Front attachment
Variant-specific front sling swivel — not confirmed for every configuration.
Identify the front swivel and handguard configuration on your FAL before choosing hardware. DS Arms documents a sling loop on its short-gas-system handguard assembly, but that application is specifically for the short configuration. It does not establish fit on every standard-length or surplus FAL.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Rear attachment
Fixed-stock or PARA rear swivel — not confirmed for every configuration.
A fixed-stock FAL and a PARA folding-stock rifle use different rear arrangements. DS Arms lists a dedicated PARA rear swivel assembly for its folding stocks. That part’s stated application should not be extended to a fixed stock or another manufacturer without confirmation.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Why this sling on the FN FAL
Lever-action and traditional rifle stocks can have fitted swivels, bare studs or no sling base. Establish the correct attachments first, then choose a carry setup that remains comfortable while walking and keeps excess strap controlled.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the rifle against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the rifle. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
This family includes original FN rifles and many later builds. Start with the fitted stock and front swivel rather than treating “FAL” as a complete hardware specification. The photographed fixed-stock example illustrates one configuration only.
A traditional swivel loop is not an integral push-button QD cup. For a McLean setup, confirm the front connector’s clearance and the rear strap route on the actual fittings. The cited replacement parts are examples of configuration differences, not items included with the sling.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the FN FAL?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my FN FAL?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the FN FAL?
Front: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware. Rear: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
What length sling do I need for the FN FAL?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Firearm photos: FN PS90 — Metroplex at English Wikipedia, CC BY-SA 3.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); FN SCAR — Defense Technical Information Center, Public domain (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Springfield Armory M1A — Stag1500 at English Wikipedia (Original text: Michael Sullivan), Public domain (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); M1 Garand — Armémuseum (The Swedish Army Museum), CC BY-SA 4.0 (Single side selected from the original two-view image; background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); M1 Carbine — Armémuseum (The Swedish Army Museum) https://commons.wikimedia.org/wiki/User:Rama, CC BY-SA 3.0 (Single side selected from the original two-view image; background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); HK G3 / HK91 — Harald Hansen, CC BY-SA 4.0 (Single side selected from the original two-view image; background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Springfield M1903 — Armémuseum (The Swedish Army Museum) through the Digital Museum ( http://www.digitaltmuseum.se )., CC BY-SA 3.0 (Single side selected from the original two-view image; background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).
