Sling for the AK 74 — Fitment & Mounts

Sling attachment guidance for the AK 74. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.

AK-74 with fixed wood stock.
AK-74 with fixed wood stock. Photo: Сергей Сандалов (sAg-) (https://forum.guns.ru/forummessage/396/1987340.html), CC BY-SA 3.0. Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.
Explore the McLean sling Dynamic Retention Rifle Sling for AR-15, Patrol & Hunting

Rated 4.9 out of 5 from 169 reviews In stock Price range: $84.99 through $87.99

Shop the sling →

Front attachment

AK-pattern front eyelet — factory attachment point.

Blue Force Gear includes AK-74 rifles in its documented AK sling applications. The conventional front eyelet accepts suitable eyelet hardware; it is not an integral QD cup. Replacement handguards must be assessed by their own mounting interface.

Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.

Rear attachment

Fixed or folding-stock attachment — not confirmed for every configuration.

The rear connection follows the stock fitted to the rifle. Confirm whether you have a fixed-stock swivel, a folding-stock loop or a replacement stock with a different interface. Do not order a QD swivel solely because another AK-74 photograph shows one.

Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.

Why this sling on the AK 74

AK stock and handguard configurations vary. Once both connections are established, a suitable carry sling can help manage movement while walking and keep the rifle close when your hands are occupied.

The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the rifle against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.

Fitting it

  1. Clear the rifle. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
  2. Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
  3. Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
  4. Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
  5. Check the transition. It should shoulder without pulling tight across your chest.

Choosing hardware for your configuration

A folding stock changes the route available to the rear strap. Check the attachment with the stock in each position you actually use for transport, keeping the hinge and latch clear. An adapter that works on a fixed stock is not automatically the right part for a side-folder.

This page covers AK-74-pattern carry attachment selection. It does not establish identical furniture across manufacturers or production runs. Record the front eyelet and rear-stock configuration before comparing sling hardware.

Questions

Does the McLean Dynamic Retention Sling (DRS) fit the AK 74?

Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.

Do I need a snap hook for the front of my AK 74?

The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.

What do I need to buy for the AK 74?

Front: Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance. Rear: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.

What length sling do I need for the AK 74?

There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.

Manufacturer and attachment references

Other firearms we have fitment for

Firearm photos: AK 47 — User:Nemo5576, CC BY-SA 4.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Galil Classic / ACE — Péter Boné, CC BY-SA 4.0 (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).

Your Cart 0

Your cart is empty

Continue Shopping