Sling attachment guidance for the Remington Versa Max. Check your exact configuration and both connectors before choosing the McLean Shotgun Sling. Factory attachment points do not by themselves confirm a direct fit.

Front attachment
Magazine cap swivel assembly — factory attachment point.
Remington's Versa Max owner's manual lists a magazine cap swivel assembly in its parts list. The front attachment on the guns it covers is therefore on the magazine cap. Check that the cap on your gun is the swivel type before buying hardware.
Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance.
Rear attachment
Stock attachment not confirmed — not confirmed for every configuration.
The same parts list gives the stock as a single stock assembly and names no separate sling stud. Inspect the underside of the buttstock for a stud or loop on the gun you own.
Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
Add it to your cart
Pick a colour and add the sling. You can review everything in your cart.
Why this sling on the Remington Versa Max
A hunting shotgun spends most of the day carried, not shouldered — across fields, in and out of a blind, over a boat gunwale. The sling needs to sit still while walking and come off fast when a bird flushes.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the shotgun against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the shotgun. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
The cited manual covers the Versa Max autoloader generally, and the archived Remington pages list the Synthetic, Sportsman, Waterfowl, camo and Tactical versions. The Tactical and Competition Tactical models use different furniture and were not checked. The Versa Max is discontinued.
A replacement or extended magazine cap may not carry the swivel. Confirm what is fitted at the front, and look for a rear stud, before choosing connectors.
Questions
Does the McLean Shotgun Sling fit the Remington Versa Max?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my Remington Versa Max?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the Remington Versa Max?
Front: Factory attachment point: confirm the connector fits and closes fully on the exact attachment. The existence of a loop does not establish McLean connector clearance. Rear: Attachment details are not confirmed for every configuration. Check the exact model and manufacturer documentation before buying hardware.
What length sling do I need for the Remington Versa Max?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Firearm photos: Remington 870 (Tactical/Express) — Unknown, Public domain (Background removed; image resized and centered.); Remington 1100 Tactical — Arthurrh, CC BY-SA 3.0 (Background removed; image resized and centered.); Remington 870 Wingmaster — RemArms, Used with manufacturer permission (Background removed; image resized and centered.); Remington 1100 (field) — Robin Schaefer / Smithsonian Institution, Public domain (United States) (Background removed; image resized and centered.); Remington V3 Tac-13 — RemArms, Used with manufacturer permission (Background removed; image resized and centered.); Remington 700 — User:M855GT, CC BY-SA 3.0 (Background removed with segmentation and reviewed manual mask corrections; subject cropped, proportionally resized and centered on a transparent 1536 × 768 canvas.); Remington 783 — Picanox, CC BY-SA 4.0 (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Remington 11-87 — Remington Arms Company, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).







