Sling for the Mossberg 930 — Fitment & Mounts

Sling attachment guidance for the Mossberg 930. Check your exact configuration and both connectors before choosing the McLean Shotgun Sling. Factory attachment points do not by themselves confirm a direct fit.

Mossberg 930 semi-automatic field shotgun, right side
Mossberg 930 semi-automatic field shotgun, right side. Representative configuration; tactical, SPX and JM Pro versions have different fittings. Photo: O.F. Mossberg & Sons, Manufacturer image used with permission. Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.
Explore the McLean sling Shotgun Sling for Hunting, Home Defense & Tactical Use

Rated 4.9 out of 5 from 169 reviews In stock Price range: $84.99 through $87.99

Shop the sling →

Front attachment

Magazine cap sling swivel stud — factory attachment point.

Mossberg’s release for the 930 Field autoloader lists a mag cap sling swivel stud. On that model the front attachment is a stud on the magazine cap, not on the barrel or forend. It takes a stud-mount swivel.

Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.

Rear attachment

Rear sling swivel stud — factory attachment point.

The same Mossberg release lists a rear sling swivel stud on the 930 Field. Confirm the stud on the underside of the buttstock of your shotgun before fitting a swivel.

Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.

Why this sling on the Mossberg 930

A hunting shotgun spends most of the day carried, not shouldered — across fields, in and out of a blind, over a boat gunwale. The sling needs to sit still while walking and come off fast when a bird flushes.

The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the shotgun against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.

Fitting it

  1. Clear the shotgun. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
  2. Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
  3. Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
  4. Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
  5. Check the transition. It should shoulder without pulling tight across your chest.

Choosing hardware for your configuration

The cited Mossberg source covers the 930 Field models only. The 930 Tactical, SPX and JM Pro versions use different stocks, forends and magazine tubes, and no Mossberg document was opened that states their sling hardware. Inspect those guns directly.

A different magazine cap or an extended magazine tube changes the front attachment. If the factory cap has been replaced, the original stud may be gone. Check what is fitted at both ends before selecting connectors.

Questions

Does the McLean Shotgun Sling fit the Mossberg 930?

Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.

Do I need a snap hook for the front of my Mossberg 930?

The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.

What do I need to buy for the Mossberg 930?

Front: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud. Rear: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.

What length sling do I need for the Mossberg 930?

There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.

Manufacturer and attachment references

Other firearms we have fitment for

Firearm photos: Mossberg 500 (hunting/field) — Chuto at English Wikipedia, CC BY-SA 3.0 (Background removed; image resized and centered.); Mossberg 590 Shockwave — O.F. Mossberg & Sons, Used with manufacturer permission (Background removed; image resized and centered.); Mossberg 500 Tactical — Егоров Игорь (SONY), CC BY-SA 2.5 (Background removed; image resized and centered.); Mossberg 590 — U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives, Public domain (Background removed; image resized and centered.); Mossberg 590A1 — Jawatech at English Wikipedia, Public domain (Background removed; image resized and centered.); Mossberg 940 Pro Tactical — O.F. Mossberg & Sons, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Mossberg Patriot — O.F. Mossberg & Sons, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Mossberg 835 Ulti-Mag — O.F. Mossberg & Sons, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).

Your Cart 0

Your cart is empty

Continue Shopping