Sling attachment guidance for the Mossberg Patriot. Check your exact configuration and both connectors before choosing the McLean Dynamic Retention Sling (DRS). Factory attachment points do not by themselves confirm a direct fit.
Front attachment
Front sling swivel stud — factory attachment point.
Mossberg lists sling swivel studs as a standard feature of the Patriot series, and its Patriot LR Tactical release specifies front and rear sling swivel studs. Identify the forward stud under the forend. It takes a stud-mount swivel and is not a QD cup.
Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
Rear attachment
Rear sling swivel stud — factory attachment point.
Mossberg’s Patriot releases describe sling swivel studs as standard, including a rear stud on the LR Tactical stock. Confirm the stud on the underside of the buttstock of your rifle and check that it is tight.
Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
Why this sling on the Mossberg Patriot
A hunting or precision rifle is carried for hours and shot once. What matters is that it rides still on the walk in, comes off cleanly, and never has a loose loop to snag when you go prone or into a rest.
The McLean design is a two-point sling with a patented retention system: it cinches tight to hold the rifle against your body hands-free, then releases into a ready position in one pull. It ships in one size and adjusts, so there is no length to choose.
Fitting it
- Clear the rifle. Unload and clear it following the firearm manufacturer’s instructions before fitting any accessories.
- Front: confirm a compatible connector and follow the sling and attachment manufacturer instructions.
- Rear: confirm the matching connector for your stock or rear attachment; do not assume a slot, stud and QD cup are interchangeable.
- Adjust wearing your kit. A setting dialled in without a vest comes up short once it is on.
- Check the transition. It should shoulder without pulling tight across your chest.
Choosing hardware for your configuration
The Patriot family includes walnut, synthetic, Cerakote, Predator and LR Tactical versions. The cited Mossberg releases cover the launch series, the Cerakote synthetic rifle, the Predator and the LR Tactical. Match your exact model before assuming the same hardware.
Some Patriot combos were sold with a sling included, according to Mossberg’s launch release. For a stud-equipped rifle, check which detachable swivels you already have. A push-button QD swivel made for a recessed cup will not connect directly to a protruding stud.
Questions
Does the McLean Dynamic Retention Sling (DRS) fit the Mossberg Patriot?
Compatibility depends on the exact configuration and connectors. Confirm both attachment points and the connector fit before ordering. A factory attachment point does not by itself confirm a direct fit for the McLean sling.
Do I need a snap hook for the front of my Mossberg Patriot?
The McLean sling already carries a front hook. Choose a compatible attachment loop or swivel for that hook, and confirm its clearance and closure on your exact setup before buying additional hardware.
What do I need to buy for the Mossberg Patriot?
Front: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud. Rear: Factory attachment point: a stud needs a compatible sling swivel to provide a loop. Confirm the swivel dimensions and attachment type; the sling hook does not attach directly to a bare stud.
What length sling do I need for the Mossberg Patriot?
There is no length to choose. The sling ships in one size and adjusts, so the same sling covers carry and cinched retention. Set it wearing the kit you actually carry in — a setting dialled in without a vest or heavy coat comes up short once it is on.
Manufacturer and attachment references
Other firearms we have fitment for
Mossberg 500 (hunting/field)
Mossberg 590 Shockwave
Mossberg 500 Tactical
Mossberg 590
Mossberg 590A1
Mossberg 940 Pro Tactical
Mossberg 930
Mossberg 835 Ulti-Mag
Firearm photos: Mossberg 500 (hunting/field) — Chuto at English Wikipedia, CC BY-SA 3.0 (Background removed; image resized and centered.); Mossberg 590 Shockwave — O.F. Mossberg & Sons, Used with manufacturer permission (Background removed; image resized and centered.); Mossberg 500 Tactical — Егоров Игорь (SONY), CC BY-SA 2.5 (Background removed; image resized and centered.); Mossberg 590 — U.S. Bureau of Alcohol, Tobacco, Firearms and Explosives, Public domain (Background removed; image resized and centered.); Mossberg 590A1 — Jawatech at English Wikipedia, Public domain (Background removed; image resized and centered.); Mossberg 940 Pro Tactical — O.F. Mossberg & Sons, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Mossberg 930 — O.F. Mossberg & Sons, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.); Mossberg 835 Ulti-Mag — O.F. Mossberg & Sons, Manufacturer image used with permission (Background removed; proportionally resized and centered on a transparent 1536 × 768 canvas.).
